ATCOM AT800 Series User Manual page 24

AT800 AT800 AT800 Series AT800 Series Series Series User User User User Manual
LAN port
LAN LAN LAN port port port
To view and edit LAN port Network parameters:
menu
� Press menu menu menu softkey
� Network Network
Scroll to Network Network, and press select
� Select LAN LAN LAN LAN,
1. Connect Type:
2. Current IP:
3. Hostname:
4. Domain:
5. Current Netmask: The current netmask
6. Current Gateway: The gateway address
7. Enable Web Server: Access by web interface. Default is set to yes. If disabled, user will not
able to access webpage.
8. Non-DHCP IP Address: Static IP address
9. Non-DHCP Subnet Mask:
10. Non-DHCP default route:
11. Non-DHCP DNS1/DNS2: Primary DNS and Secondary DNS working in static IP.
12. PPPoE Login Name: username in PPPoE mode
13. PPPOE login Password: password in PPPoE mode
PC PC PC PC port port port port
To view or edit the PC port network parameters:
� Press menu soft key
Network
� Scroll to Network Network Network, and press select
� PC PC PC,
Select PC
1. LAN IP: the PC port IP address when performed as a router
2. Netmask: the subnet netmask
3. NAT: make the device performing as an router which can forward IP packet
4. Bridge Mode: set to yes will make the LAN port and PC port working in bridge mode. And
DHCP service will stop in this mode.
5. DHCP Service: set to yes, the PC port will work as a DHCP Server.
6. Lease Start IP: the start IP for DHCP Server.
7. Lease End IP: the end IP for DHCP Server.
save
� Press save save save
ATCOM TECHNOLOGY CO., LIMITED
All manuals and user guides at all-guides.com
Manual Manual Manual
select select
select
DHCP, PPPoE, Static
IP address
Hostname
The domain name
Static netmask address
Static gateway address
select
select select
www.atcom.cn