Quick Reference Guide; Sending Faxes; Receiving Faxes - Brother 2850 Owner's Manual

Quick Reference Guide

For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed
in the carton box.

Sending Faxes

Automatic Transmission
1
Place the original face down in the ADF.
2
Enter the fax number using One Touch (For
FAX-2850 Only), Speed Dial, Search or the
dial pad.
3
Press Fax Start.
4
Sending a Cover Page
5
Place the original face down in the ADF.
6
Press Menu/Set, 2, 2, 7.
7
When NEXT FAX ONLY appears, press
Menu/Set.
8 or
Press to select ON (or OFF), and then
press Menu/Set.
9
or
Press to select a comment, and then
press Menu/Set.
10
Enter two digits to indicate the number of
pages being sent, and then press Menu/Set.
11
Press 1 to select additional settings
—OR—Press 2 if you are ready to fax.
12
Enter the fax number.
13
Press Fax Start.
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 5.
3
or
Press to select ON, and then press
Menu/Set
—OR—
For the next transmission only, press
to select NEXT FAX ONLY, and then
press Menu/Set.
4
For the next fax only, press
ON, and then press Menu/Set.
5
Press 1 to select additional settings
—OR—Press 2 if you are ready to fax.
6
Enter the fax number.
7
Press Fax Start.

Receiving Faxes

Select Receive Mode
Press Receive Mode to select FAX ONLY,
FAX/TEL, TAD:ANSWER MACH. or
MANUAL. If you select
FAX/TEL, make sure to set Ring Delay and F/T
Ring Time.
Manual Reception
1
Pick up the handset.
2
Press Fax Start if you hear fax tones
(beeps).
3
When the LCD shows RECEIVING,
replace the handset.
or
or
to select
v