Using The Keg - Krups BeerTender Manual

1-B90 oneway Amsterdam_UK_1-B90 oneway Amsterdam_UK.qxd 30/05/13 13:57 Page9
12°C
30°C
You should also follow these other rules when using the
BeerTender system:
1. Do not attempt to chill a BeerTender Keg in your
freezer. Just like glass bottles, a keg may burst when
placed in the freezer. Moreover, freezing diminishes
the quality of the beer;
2. Your BeerTender uses a technology that delivers
ultimate cooling results when the ambient
temperature is between 12°C and 30°C. At colder
temperature, the appliance cooling system could be
damaged. At warmer temperature, the cooling
system will not be able to reach the set regulation
temperature of 3°C.
Warning! To avoid overheating, always keep the
BeerTender keg out of direct sunlight. To obtain good
cooling performance, never install your machine in a room
with an ambient temperature above 30°C.
3. Always hold the appliance by the bottom edge when
lifting it.
Warning! Do not use the handle or power cord to lift the
BeerTender.

using the Keg

Make sure that you chill the keg before using it. If you fail
to chill the keg sufficiently too much foam will be produced
when you start to pour beer.
Please also be aware that the first glass that you pour
from every new keg will contain mostly foam. Draught
beer in a bar behaves in exactly the same way!
The BeerTender Keg "Compatible BeerTender" features a
patented system for storing and dispensing beer. It
guarantees beer of higher, long-lasting quality and a
BeerTender system that is very easy and pleasant to use.
Important: Before installing a keg inside the appliance,
check the "best before end" date shown at the bottom of
the keg. This date is a reliable indication if the keg has
been stored at room temperature.
The use of kegs "Compatible BeerTender" in the
BeerTender system necessitate the use of beer tubes. A
bag of tubes is delivered with the BeerTender appliance.
To receive, free of charge, additional beer tubes please
contact our customer service via.
(see details per country at the end of this manual)
9