Technical Specifications - Krups BeerTender Manual

1-B90 oneway Amsterdam_UK_1-B90 oneway Amsterdam_UK.qxd 30/05/13 13:57 Page7

3 technical specifications

Rated voltage:
Rated power:
Power supply:
Insulation class:
Cooling class:
Casing material:
Size
(w x h x d) (mm)
Weight:
Cord length:
Beer container:
Control panel:
Operating conditions With 80% R.H.
The manufacturer reserves the right to make
constructive and engineering changes as warranted by
technological advances.
Appliance complying with European Directive
89/336/EEC (Legislative Decree 476 of 04/12/92)
concerning electromagnetic compatibility.
Never place powered components in contact with water.
There is a danger that this may cause a short circuit.
Intended use
This appliance has been manufactured exclusively for
dispensing beer in a domestic setting.
Only original BeerTender Kegs mentioning "Compatible
BeerTender" can be used with the appliance; you should
not use any other commercially available beer containers.
Before using a keg, check the "best before end" date
shown at the bottom of the keg. Do not insert or use
BeerTender Kegs after the date shown.
You should not use the appliance for purposes or with
containers other than those specified above.
You should not introduce any materials other than
BeerTender Kegs inside the appliance.
You should not make technical changes or use the
appliance in any manner other than as directed, due to
the risks involved!
The appliance should be used solely by adults in full
possession of their mental and physical capacities.
Cleaning
Before cleaning the appliance, it is essential to turn off the
main switch and then pull the plug out of the socket.
Never immerse the appliance in water!
7
220-240 V
61W
50Hz
II
SN
Thermoplastic
300 x 452 x 494
(419 without drip tray)
6,1 kg. (5,6 kg. without drip tray)
1.4 m
BeerTender Keg
Top
min 12°C, max 30°C