Setting The Function Setting Switch - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

4.2

Setting the Function Setting Switch

The following functions are set using the function setting switch (1 to 10) on the front of the I/O module. The setting using the
function setting switch is enabled when the power of the I/O module is ON. Therefore, use the function setting switch when
the power of the I/O module is OFF.
The following table lists the functions to be set in this manual.
Switch
Function setting switch 1
Function setting switch 2
Function setting switch 3
Function setting switch 4
Function setting switch 5
Function setting switch 6,
function setting switch 7
Function setting switch 8,
function setting switch 9
Function setting switch 10
For details on the function setting switch, refer to the following.
Section 6.2 Setting Switch in the CC-Link IE TSN Remote I/O Module User's Manual (CC-Link IE TSN Communication
Mode)
4 SETTING REMOTE STATION
26
4.2 Setting the Function Setting Switch
Function
NETWORK Network setting function
RESPONSE Input response time
setting function
HOLD/CLEAR Output HOLD/CLEAR
setting function
MODE Use prohibited
F LINK P1/P2 Use prohibited
LINK SPEED Communication speed
setting function
Setting
Set this switch to OFF in normal
operation.
Set the input response time.
Set output HOLD/CLEAR.
Fix these switches to OFF.
Fix these switches to OFF.
Set the communication speed.
Setting value Setting value to be set

OFF
OFF 1 ms
OFF
OFF
OFF CLEAR
OFF 

OFF
OFF 1 Gbps