Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual page 34

10.
Double-click "Ethernet Board".
11.
Set a unique station number in "Station No." on the same loop. Set "3" in this manual. Select "TCP" for "Protocol". Click
the [OK] button.
12.
Click the [Communication Test] button. When the message "Successfully connected with the FX5UCPU" appears, click
the [OK] button.
13.
Repeat Steps 2 to 12 on GX Works3 window of the local station. However, the setting values in Step 9 are as follows.
Setting item
IP Address
Station No.
6 OPERATION CHECK
32
6.1 Operation Check of the Local Station
Setting value
192.168.3.11
2
Description
An IP address of the local station
A station number of the local station