Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual page 40

3.
To start reading the QR code by the code reader, perform Steps  to .
4.
Check that Decode Complete (D1002.9) of the code reader has been changed from "0" to "1".
Check that D1002.9 is changed from "0" to "1".
5.
Check the result read by the code reader. Check that "AB", "CD", "EF", "G0", "12", and "34" are entered in the "String"
columns of "D1015" to "D1020".
6 OPERATION CHECK
38
6.3 Operation Check of the Code Reader (TCP/IP Communications)
Ò Ò
Click
Ó Ó
Click
Ô Ô
 Enter "D1000" in "Device Name".
 Click Image Capturing Trigger Enable (D1000.0).
(Change D1000.0 from "0" to "1".)
 Click Image Capturing Trigger (D1000.1).
(Change D1000.1 from "0" to "1".)
Device name
D1015
D1016
D1017
D1018
D1019
D1020