Mocka Addi Six Drawer - Wide Assembly Instructions Manual page 11

Addi Six Drawer - Wide
Assembly Instructions
19
V
Z
W
J
K
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x washers (Z) and
2x screws (W). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
J
K
V
J
K
Z
W
V
Z
W
20
X
Z
Y
Once assembled lift furniture into place, do not drag. Use a drill to create a
small hole lining up with the top of the safety strap (V). Fasten to wall using
2x washers (Z), 2x wall anchors (X) and 2x screws (Y). Ensure unit is
balanced and steady before use. You're done, enjoy!
strap
X
Z
wall
Y
anchor
screw
11