Advertisement
Quick Links
Addi Six Drawer - Slim
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
dowel
screw
locking
x4
x16
x24
nut x16
L
K
M
Allen
screw
nut
x4
x8
key x1
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
x60 0
rail x6
rail x6 6
rail x6
Q
N
O
P
plastic
small
small
long
bolt
locking
glide x4
Allen
x24
nut x24
bolt x 4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
slide
wedge
slide
x8
rail x6
R
S
screw
big
x24
dowel
x4
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Addi Six Drawer Slim
Summary of Contents for Mocka Addi Six Drawer Slim
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Attach 6x slide rail (F) and 6x slide rail (G) to panels [3] and [4] as shown with 36x screws (E). Tighten with a screwdriver. Insert 6x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panels [5], [6] and [7] to panel [3] with 8x dowels (A) Slide panel [8] down along the grooves between the panels [7]. and secure with 6x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Slide panel [8] down along the grooves between the panels [3] and [4] secure with 6x locking nuts (D). Tighten with a screwdriver. to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 4x screws (B). Tighten with a screwdriver. Attach 4x plastic glides as shown. Secure with 4x long Allen bolts (Q). Tighten with an Allen key (M). (N) to the end of legs [9] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Slide panel [8] between the grooves of panels [3] and [4]. Attach panel [1] to the unit with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Tighten with a screwdriver. Slide panel [14] down along the grooves to panel [12] as shown. Secure with 4x small screws (E) and between panels [12] and [13] to form the base of the drawer. tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 4x screws (K). Tighten with a screwdriver. Attach 1x safety straps (V) to the top of the back side of the unit as shown using 1x washers (Z) and 1x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Addi Six Drawer Slim and is the answer not in the manual?
Questions and answers