Table of Contents
Advertisement
Quick Links
Addi Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
dowel
screw
locking
x4
x10
x17
nut x10
L
K
M
Allen
screw
nut
x4
x8
key x1
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
slide
x30
rail x3
rail x3
rail x3
Q
N
O
P
plastic
long
small
small
bolt
locking
glide x4
Allen
x15
nut x15
bolt x 4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
slide
wedge
strap x1
x8
rail x3
R
S
screw
big
x18
dowel
x4
V
W
X
safety
screw
wall
x1
anchor
screw
x1
Wall Strap
Y
Z
wall
washer
x2
x1
1
Advertisement
Table of Contents
Related Manuals for Mocka Addi Three Drawer
Summary of Contents for Mocka Addi Three Drawer
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 [3] and secure with 3x locking nuts (D). Tighten with a 3x slide rails (F) to panel [3] and secure with 9x small screws (E).Tighten screwdriver. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Slide panel [8] between the grooves of panels [3] and [4] to form the Attach panel [4] to the unit and secure with 3x locking nuts (D). back of the unit, as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 4x nuts (L) as shown. Secure with 4x long Allen bolts (Q). with 4x screws (B). Tighten with a screwdriver. Attach 4x plastic glides (N) to the end of legs [9] as shown. Tighten with an Allen key (M). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Addi Three Drawer Assembly Instructions Slide panel [8] between the grooves of panels [3] and [4]. Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 [12], [13] and [14] to panels [10] and [11] with 1x dowel (A) and 5x small locking nuts (P). Tighten with a screwdriver. Slide panel [15] down along the grooves between panels [12] and [13] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Now attach 1x slide rail (I) to panel [13] and 1x slide rail (H) to panel along the rails. [12] as shown. Secure with 4x small screws (E) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is 1x screw (W). Tighten with a screwdriver. balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Addi Three Drawer and is the answer not in the manual?
Questions and answers