Page 1
Allen key Side Panel Cot Mattress Base End Panel WARNING: TO PREVENT FALLS,THE MATTRESS BASE OFTHIS COT SHOULD BE ADJUSTEDTOTHE LOWEST POSITION BEFORETHE CHILD CAN SIT UP mocka.co.nz | mocka.com.au | PO Box 6171, Maroochydore, BC, 4558, QLD.
Page 2
Mocka Aspiring Cot Assembly Instructions Find one of the side panels and attach to both end panels of the cot using 4x screws (A) in the holes as shown. mocka.co.nz | mocka.com.au...
Page 3
Mocka Aspiring Cot Assembly Instructions Attach the cot mattress base at the required level using 4x screws (A) as shown, and tighten all screws using the allen key (C). mocka.co.nz | mocka.com.au...
Page 4
Mocka Aspiring Cot Assembly Instructions Slide the remaining side panel into place and attach using 4x screws (A) in the holes as shown. Tighten all screws using the allen key (C). mocka.co.nz | mocka.com.au...
Page 5
Mocka Aspiring Cot Assembly Instructions Turn the cot on the side and secure the base with 4x screws (B) in the holes as shown. Tighten all screws using the allen key (C). mocka.co.nz | mocka.com.au...
Page 6
Mocka Aspiring Cot Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS OPTIONAL/MATTRESS HEIGHT ADJUSTMENT (please keep these instructions handy for future reference) To adjust mattress base settings, remove small plastic plugs. This will require a small amount of force, please note these are not screws and cannot be screwed out.
Need help?
Do you have a question about the Aspiring Cot and is the answer not in the manual?
Questions and answers