Yamaha Z150P Supplementary Service Manual page 133

BRKT
TRIM RAM ASSEMBLIES AND FREE PISTON
7090
7100
7110
7080
1. Fill:
• Trim ram cylinders
Recommended power trim and
tilt fluid
ATF Dexron II
NOTE:
Hold the power trim and tilt unit in a vise
using aluminum plates on both sides.
2. Fill:
• Fluid passages
Recommended power trim and
tilt fluid
ATF Dexron II
NOTE:
Add power trim and tilt fluid through holes
a, b and c until all of the passages are
filled.
3. Install:
• Trim ram assemblies 1
NOTE:
Place each trim ram end screw at the bot-
tom of each trim ram and install them into
the trim ram cylinders.
4. Tighten:
• Trim ram end screws
End screw wrench
YB-06175 / 90890-06548
Trim ram end screw
80 N • m (8.0 kgf • m, 58 ft • lb)
– 119 –
E