Yamaha Z150P Supplementary Service Manual page 106

LOWR
Å
ı
DRIVE SHAFT (COUNTER ROTATION MODELS)
6410
6420
6430
6440
ASSEMBLING THE DRIVE SHAFT
HOUSING ASSEMBLY
1. Install:
• Needle bearing
Position a
5.75 - 6.25 mm (0.226 - 0.246 in)
Bearing/oil seal attachment .... 1
YB-06196 / 90890-06610
Driver rod .................................. 2
YB-06071 / 90890-06604
Bearing/oil seal depth plate .... 3
90890-06603
Å For USA and Canada
ı For worldwide
2. Install:
• Oil seals
Oil seal installation position a
0.25 - 0.75 mm (0.010 - 0.030 in)
Bearing/oil seal attachment .... 1
YB-06195 / 90890-06633
Driver rod .................................. 2
YB-06071 / 90890-06606
INSTALLING THE REVERSE GEAR
Install:
• Thrust bearing
• Reverse gear assembly
NOTE:
Install the thrust bearing onto the reverse
gear assembly and position the thrust bear-
ing so its rounded side faces away from the
reverse gear.
– 92 –
E