Yamaha Z150P Supplementary Service Manual page 115

LOWR
BACKLASH (REGULAR ROTATION MODELS)
6560
6570
(2) Install the propeller shaft housing
puller so it pushes against the propel-
ler shaft.
Propeller shaft housing puller . 1
YB-06207 / 90890-06502
Universal puller......................... 2
YB-06117
Guide plate................................ 3
90890-06501
Center bolt ................................ 4
90890-06504
Center bolt
10 N • m (1.0 kgf • m, 7.2 ft • lb)
(3) Install the backlash indicator onto the
drive shaft (on the 22.4 mm (0.88 in)
diameter portion of the drive shaft).
Backlash indicator .................... 5
YB-06265 / 90890-06706
(4) Install the dial gauge onto the lower
unit and have the dial gauge plunger
contact the mark on the backlash indi-
cator.
Magnetic-base plate................. 6
YB-07003 / 90890-07003
Dial gauge set ........................... 7
YU-03097 / 90890-01252
Magnetic base........................... 8
YU-34481 / 90890-06705
(5) Set the lower unit upside down.
(6) Slowly turn the drive shaft clockwise
and counterclockwise. When the drive
shaft stops in each direction, measure
the backlash.
- 101 -
E