Fan Unit Extraction; Cover Extraction; Figure 6 - Extracting The Fan Unit; Figure 7 - Remove Cover - Mellanox Technologies MetroDX MTX6000-2SFS Dismantling Manual

Rev 1.1
2.4

Fan Unit Extraction

To extract a fan unit push both latch releases simultaneously while pulling the fan module out
of the switch.
I2C
These two latches must be pushed towards each other at the same time while the module is
pulled out.
2.5

Cover Extraction

Unscrew all of the screws from the top and sides of the cover.
Slide the cover to the power side and remove the cover.
12
Figure 6 – Extracting the Fan Unit
Figure 7 – Remove Cover
Mellanox Technologies Confidential
Dismantling Instructions
OK
Mellanox
OK