Reference Manual
00809-0100-4108
Figure 3-9: PTFE Installing the Weld Spud
Code "C" in Model Structure or P/N 02088-0195-0005
A. 100–125 Amps recommended
B. Heat isolation grooves
C. Weld spud
D. Bevelled edge
E. Process
3.6
Rosemount 306 Manifold
The Rosemount 306 Integral Manifold is used with the Rosemount 2088 in-line
transmitters to provide block-and-bleed valve capabilities of up to 10000 psi (690 bar).
Figure 3-10: Rosemount 2088 and 306 In-line Manifold
Reference Manual
Hardware Installation
April 2021
49