Table of Contents
Advertisement
5.1 Graphic terminal
The built-in terminal on the "Main" electrical panel comprises the display
and the keypad, featuring 6 buttons, which are used to perform all the
configuration and programming operations on humiSonic.
5.2 Keypad
est
est
st
ato
29/05/2015
ato
29/05/2015
o
12:30
BUTTON
• Display the list of active alarms
29/05/2015
Alarm
• Reset alarms with manual reset
Access to the main menu
Prg
Return to the previous screen
Disabled
Esc
• Scroll between screens
Disabled
:30
:30
/
• Increase / decrease the value
Up / Down
Disabled
• Switch from display mode to setting mode
• Confirm the value and move to the next parameter
Enter
5.3 Display
Autotest
During normal operation, the display shows, as well as the current
Autotest
date and time, the type of control selected, the reading of the control
probe and limit probe (if featured), and the quantity of atomised water
utotest
produced.
1
29/05/2015
2
Unit Offline
3
99.2rH%
4
Production 0.5Kg/h
Key
1 Current date/time
Cause of unit shutdown/Unit
2
status
3 Request
4 Control type selected
5 Unit status
5. USER INTERFACE ("MAIN" PANEL)
29/05/2015
Fri
12:30
ON
On
OFF
Production
0.5Kg/h
Fig. 5.a
Fri
12:30
Fri
12:30
DESCRIPTION
Fri
12:30
10
Fri
12:30
On
ON
OFF
5
6
7 8
Fig. 5.b
6 Limit humidity probe reading
7 Unit status icon/active actuators
8 Quick access button menu icon
9 Maintenance required
10 Time bands enabled
Message
Off by Key
Unit Offline
Remote On/Off
No request
Unit disabled
Alarms
Manual mode
Off from BMS
Off from Sched.
Message
Production ...Kg/h/(lb/h)
Drain
Init
Fill
Autotest
Waiting (.. min)
Disabled
Request
On/--
On= request
--- = no request
0 to 100 % Request percentage
rH%:
Control probe reading in rH% rH% probe
°C
Control probe reading in °C
Unit status/ active actuators
Tab. 5.a
9
Note: the control type is selectable in user menu F, under screen Fa01:
Regulation. See the parameter table.
21
CAUSE OF UNIT SHUTDOWN
Description
Off from keypad
Unit offline
Remote On/Off
No request
Unit disabled
Alarms
Manual mode
Off from BMS
Off from Sched.
UNIT STATUS
Description
Instant production in kg/h (lb/h)
Drain
Initialisation
Filling
Autotest
Waiting (.. min) to restart
Disabled
Meaning
Control type
On/Off
%
Ext. regulator
T probe
Meaning
Production in progress
Fill in progress
Drain open
Water present
Stop transducer control
Malfunction
"humiSonic ventilation" +0300063EN - rel. 1.3 - 14.05.2021
ENG
Tab. 5.a
Tab. 5.b
Tab. 5.c
Tab. 5.d
Advertisement
Table of Contents
