Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual page 126

Superimposing a still picture in a "Memory Stick" on a moving
picture – MEMORY MIX
Items to be adjusted
M. CHROM
M. LUMI
C. CHROM
M. OVERLAP No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
To change the still picture to be superimposed
Do either of the following:
– Press MEMORY+/– before step 6.
– Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4.
(Except for M.OVERLAP)
To change the mode setting
Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4.
(Except for M.OVERLAP)
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
• You can not use MEMORY MIX function for moving pictures recorded on "Memory
Stick"s.
• When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified with computers or shot with other equipment
You may not be able to play them back with your camcorder.
When you set the POWER switch to MEMORY
You cannot select M.OVERLAP.
The "Memory Stick" supplied with your camcorder has stored 20 images
– For M.CHROM : 18 images (such as a frame) 100-0001 ~ 100-0018
– For C.CHROM : 2 images (such as a background) 100-0019 ~ 100-0020
Sample images
Sample images stored in the "Memory Stick" supplied with your camcorder are
protected (p. 143).
During recording
You cannot change the mode setting.
126
The color (blue) scheme of the area in the still picture which is to be
swapped with a moving picture
The color (bright) scheme of the area in the still picture which is to be
swapped with a moving picture
The color (blue) scheme of the area in the moving picture which is to be
swapped with a still picture