Recording An Image From A Tape As A Still Image - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

Recording an image from a tape as a still
image
– DCR-TRV17 only
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick".
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The picture recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
"CAPTURE" appears on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
"Memory Stick." Recording is complete when the bar scroll indicator
disappears.
2
PLAY
REW
3
When the access lamp is lit or flashing
Never shake or strike the unit. As well do not turn the power off , eject a "Memory
Stick" or remove the battery pack. Otherwise, the image data breakdown may occur.
If " " appears on the screen
The inserted "Memory Stick" is incompatible with your camcorder because its format
does not conform with your camcorder. Check the format of the "Memory Stick."
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
FF
CAPTURE
1
4
VCR
OFF(CHG)
CAMERA
MEMORY
117