Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual page 72

Dubbing only desired scenes – Digital program editing
(4) Confirming VCR operation
1 Insert a recordable tape into the VCR, then set to recording pause.
2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
2
When the VCR does not operate correctly
• After checking the code in "About the IR SETUP code," set the IR SETUP or the
PAUSEMODE again.
• Place your camcorder at least 30 cm (12 in.) away from the VCR.
• Refer to the operating instructions of your VCR.
72
If the VCR starts recording, the setting is correct.
When finished, the indicator changes to COMPLETE.
O T H E R S
E D I T S E T
CON T RO L
A D J T E S T
" CU T - I N "
" CU T -OU T "
I R S E T U P
P A U S EMOD E
I R T E S T
R E T U R N
[ ME N U ] : E N D
3
E NGAGE
R E C P A U S E
R E T U R N
E X E C U T E
O T H E R S
E D I T S E T
CON T RO L
A D J T E S T
" CU T - I N "
" CU T -OU T "
I R S E T U P
P A U S EMOD E
I R T E S T COMP L E T E
R E T U R N
[ ME N U ] : E N D