Searching The Boundaries Of Recorded Tape By Title - Title Search - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

Searching the boundaries of recorded
tape by title – Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title. Use the Remote Commander for this operation.
Before operation
Set CM SEARCH in
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(3) Press . or > on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
2
TITLE SEARCH
1 HELLO!
SEARCH
2 CONGRATULATIONS!
MODE
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
3
To stop searching
Press x.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the
•The bar in the
•The mark in the
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
To superimpose a title
See page 89.
to ON in the menu settings (p. 100). (The default setting is ON.)
TITLE SEARCH
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
mark
mark indicates the present point on the tape.
indicates the actual point you are trying to search.
61