Playing back images in a continuous loop
– SLIDE SHOW
– DCR-TRV17 only
You can automatically play back images in sequence. This function is useful especially
when checking recorded images or during a presentation.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
(4) Turn the SEL/PUSH EXEC dial to select SLIDE SHOW, then press the dial.
(5) Press MEMORY PLAY. Your camcorder plays back the images recorded on a
"Memory Stick" in sequence.
2
MENU
5
PLAY
To stop the slide show
Press MENU.
To pause during a slide show
Press MEMORY PLAY.
To start the slide show from a particular image
Select the desired image using MEMORY +/– buttons before step 2.
To view the recorded images on TV
Connect your camcorder to a TV with the A/V connecting cable supplied with your
camcorder before operation.
If you change the "Memory Stick" during operation
The slide show does not operate. If you change the "Memory Stick," be sure to follow
142
the steps again from the beginning.
3
4
MEMORY SET
STILL SET
MOVIE SET
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
, then press the dial.
1 1
LOCK
MEMORY SET
STILL SET
MOVIE SET
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
READY
VCR
OFF(CHG)
CAMERA
MEMORY
1 / 100
SL I DE SHOW
100-0001
[ M PLAY ] : START [ MENU ] : END
Need help?
Do you have a question about the DCR-TRV17 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers
TIPO DE CABLE PARA CONECTAR LA CAMARA A UNA LAPTOP