Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

Step 1 Preparing the power supply

Installing the battery pack

Install the battery pack to use your camcorder outdoors.
(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of the arrow while pressing BATT
If you use the large capacity battery pack
If you install the NP-FM70/FM90/FM91 battery pack on your camcorder, extend its
viewfinder.
12
down.
1
2
1
2
2
BATT release
button