Using a "Memory Stick" – introduction
Selecting the image size
You can select 320 240 or 160 112 of the moving picture size.
The default setting is 320
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
(4) Turn the SEL/PUSH EXEC dial to select MOVIE SET (moving picture), then
(5) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
108
the left (unlock) position.
press the dial.
dial.
The indicator changes as follows:
320
160
240.
, then press the dial.