Playback - Basics; Playing Back A Tape - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

— Playback – Basics —

Playing back a tape

You can monitor the playback picture on the screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder. You can control playback using the
Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) To open the LCD panel, press OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. The
speaker on your camcorder is silent when the LCD panel is closed.
6
3
To stop playback
Press x.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
When you open or close the LCD panel
Make sure that the LCD panel is set vertically.
4
VOLUME
5
REW
2
1
PLAY
VCR
OFF(CHG)
CAMERA
MEMORY
31