Kaco blueplanet 50.0 TL3 Operating Instruction page 21

1 3
4
Fig. 14: Connection terminals - basic
version
Key
1 AC connection terminal
2 Base AC overvoltage protection
3 DC isolator switch
TN-C system
↻ Connection cable with 4 wires is provided on the device.
↻ Nominal grid voltage matches the VAC nom name plate details.
1 Unfasten the cable fitting for the AC connection [ W_68].
2 Remove the outer cladding of the AC cables.
3 Insert the AC cables through the cable fitting into the connection area.
4 Strip the AC lines [approx. 25 mm].
» Make the grid connection.
2
1
6
5
Fig. 18: blueplanet 50.0TL3 XL-Version
Key
1 AC connection terminal
2 Base AC overvoltage protection
3 DC isolator switch
KACO blueplanet 50.0 TL3
2
1
Fig. 15: Connection terminals - M ver-
sion
3
4
1
3
PV-
PV+
4
Fig. 16: Connection terminals S version
4 DC connection with protection against contact
5 Base DC overvoltage protection
Fig. 17: Terminals
4 DC connection
5 DC overvoltage conductor (SPD), type 1+2
6 DC fuse holder
4
PV+ PV-
AC side
DC-side
Page 21