Operation; Preparation For Use; Ip Address Setting - Protek A334M User Manual

4 Operation

4.1 Preparation for use

4.1.1 IP Address Setting

A334M PC GUI is communicated with A334M by Ethernet, and every single port
of A334M is set with individual IP address. Therefore, the PC IP address has to be
changed for the communication between PC and A334M.
IP address of each port
Port 1
192.168.0.81
Port 2
192.168.0.82
Port 3 192.168.0.83
Port 4 192.168.0.84
Port 5 192.168.0.85
Port 6 192.168.0.86
For the communication between PC and A334M, IP address of 192.168.0.xxx
must be set except from 192.168.0.81 to 192.168.0.86 because the IP address of
each port is from 192.168.0.81 to 192.168.0.86. The instructions for IP address
setting is following.
1. As you see below, please click and enter to 'Network and sharing center'
Figure 4.1 "Network and Sharing center" icon at yellow box.
2. Please click "Network and Sharing Center' -> "View your active networks"
-> Local area connection
© 2015 GS Instruments, Co., Ltd
Table 4.1 IP address of each port
1 GENERAL OVERVIEW
21