Protek A334M User Manual page 44

Version 1.0 ▪ August 2015
Instruction to display Limit Line at Limit Measure Window.
 Input appropriate Marker List value at Limit Measure Window
 Click Apply button
 Result of pass or failure will be displayed over Trace window.
Note) Unless setting condition is different from the types of Limit Line,
Failure message will be popped up and red marker point will be
displayed over trace of relevant frequency range. Please refer to the
below table with regard to types of Limit line.
44
Figure 4.17 Limit Line
VSWR Analyzer
A334M
© 2015 GS Instruments, Co., Ltd