Protek A334M User Manual page 25

A334M PC GUI Program Main Window Description
No. Parameter
1
Top Menu Bar
Right Side Button
2
Menu
Trace
3
Number/Scale Div.
4
Cal Status
5
Port No.
6
Scale
7 Start Freq.
8 Trace Point
9 Stop Freq.
Table 4.2 A334M PC GUI Program Main Window Description
© 2015 GS Instruments, Co., Ltd
Description
Setting file management, Equipment update
support, program information etc.
Referred as ☞ 4.3 Top Menu Bar
Actual control functions are gathered in the menu
Referred as ☞ 4.4 Right Side Button Menu
Checking number trace and division of Scale
Calibration Status shall be checked by On/Off
Single View provide one signel port number of
measurement
Current setting value of Scale.
Refered as ☞ 4.4.3. Amplitude
Current setting value of Start Frequency
Referred as ☞ 4.4.2. Frequency / 4.4.5 Marker
Measure / 4.4.7 Limit Measure
Current setting value of Trace Point (126 / 251 /
501 / 1001 / 2001)
Referred as ☞ 4.4.2 Frequency
Current setting value of Stop Frequency
Referred ☞ 4.4.2. Frequency / 4.4.5 Marker
Measure / 4.4.7 Limit Measure
1 GENERAL OVERVIEW
25