Test Ports ( Port 1 ~ Port 6 ); Rear Panel; Ac Socket - Protek A334M User Manual

Version 1.0 ▪ August 2015
CAUTION

2.2.2 TEST Ports ( Port 1 ~ Port 6 )

CAUTION
2.3

Rear Panel

The rear view of A334M is represented in figure 2.2. The rear panel is equipped
with the following parts:

2.3.1 AC Socket

12
Do not disconnect the power cable from the
mains when the Analyzer is operating. This can
damage the Analyzer software.
The type-N 50Ω test port 1 to 6 are intended for
DUT connection.
+25dBm 50VDC Max (50Ω Port1 ~ Port6)
Do not exceed the maximum allowed power of
the input RF signal (or maximum DC voltage)
indicated on the front panel. This may damage
your Analyzer.
Figure 2.2 A334M Rear Panel
Provides input for the AC power source via an AC Socket
VSWR Analyzer
A334M
© 2015 GS Instruments, Co., Ltd