Port Side Of The Brocade 300; Non-Port Side Of The Brocade 300 - Brocade Communications Systems 300 Reference Manual

1

Port side of the Brocade 300

•
•
•

Port side of the Brocade 300

The port side of the Brocade 300 includes the system status LED, console port, Ethernet port and
LEDs, USB port, and Fibre Channel ports and the corresponding port status LEDs.
Figure 1
1
FIGURE 1
1
2
3
4
5
6
7
8

Non-port side of the Brocade 300

The non-port side of the Brocade 300 is used solely for air flow. There are two labels on the bottom
of the chassis. On the right side is the Brocade standard agency label. On the left side is the
Brocade standard OEM data label.
2
A single motherboard design with a 667 MHz PowerPC 440EPx Reduced Instruction Set
Computer (RISC) CPU with integrated peripherals.
Inter-Switch-Link Trunking (licensable) which enables up to eight ports (at 1, 2, 4, or 8 Gbps
speeds) between a pair of switches to be combined to form a single, logical ISL switch with a
speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load
balancing.
Dynamic Path Selection (DPS) which optimizes fabric-wide performance and load balancing by
automatically routing data to the most efficient available path in the fabric.
shows the port side of the Brocade 300.
2 3 4
5
2
Port Side of the Brocade 300
Switch ID pull-out tab
System status (top) and power (bottom) LEDs
System RS232 console port (RJ-45)
Ethernet port with two Ethernet status LEDs
USB port
Fibre Channel port status LEDs
Fibre Channel ports (24)
AC power receptacle
6 7
Brocade 300 Hardware Reference Manual
8
53-1000862-02