Table of Contents
Advertisement
1
Hardware Description
•
TABLE 1
Port Licensing
Base
POD
Hardware Description
This section describes the physical SAN I/O Module as shipped from the factory. For specifications,
such as installed memory, weight and physical dimensions, facility requirements, architectural
specifications, and regulatory compliance, refer to
Port side
Externally accessible ports and LEDs are on the port side of the SAN I/O Module. The port side
faces out when the SAN I/O Module is inserted into the I/O bay of the Blade Server enclosure.
Figure 1
these LEDs, see
Access the I/O module handle at the front of the port side of the SAN I/O Module. By lifting the
handle's release latch, you can open the handle to remove and insert the unit from the Blade
Server Enclosure.
FIGURE 1
1. Ports with port status and port speed LEDs
2. RJ45 console port
3. SAN I/O Module status LED
4. Power status LED
5. Server management LED
6. SAN I/O Module handle
4
For static POD,
Table 1
shows the base internal and external ports that are licensed, as well as
the additional 12 ports that can be activated with a POD license. For details about activating
and deactivating additional ports when you have POD licensing, refer to
Demand (POD)"
on page 17.
Ports available
External Ports
17, 18, 19, and 20
0, 21, 22, and 23
details the port side. For a complete description of the locations and interpretations of
"Interpreting LED activity"
Port Side View
Internal Ports
1, 2, 3, 4, 5, 6, 7, and
8
9, 10, 11, 12, 13, 14,
15, and 16
Appendix A, "SAN I/O Module specifications"
on page 22.
1
4424 Blade Server SAN I/O Module Hardware Reference Manual
"Activating Ports on
2
5
6
3
4
53-0000571-01
Advertisement
Table of Contents
