Memory Specifications; Fibre Channel Port Specifications - Brocade Communications Systems 300 Reference Manual

TABLE 9
Port Speed
1 Gbps
2 Gbps
4 Gbps
8 Gbps

Memory specifications

The Brocade 300 memory specifications are shown in
TABLE 10
Memory Type
Main memory (SDRAM)
Compact flash

Fibre Channel port specifications

The Fibre Channel ports in the Brocade 300 are compatible with SWL, LWL, and ELWL SFPs. The
strength of the signal is determined by the type of SFP in use.
The ports meet all required safety standards. For more information about these standards, see
"Regulatory compliance"
The ports are capable of operating at 1, 2, 4 and 8 Gbps, and are able to autonegotiate the highest
speed capable for all attached devices.
Brocade 300 Hardware Reference Manual
53-1000862-02
Laser Data Transmission Ranges
Cable Size Short Wavelength (SWL)
(microns)
50 500 m (1,640 ft) (OM2)
860 m (2,821 ft) (OM3)
62.5 300 m (984 ft)
9 NA
50 300 m (984 ft) (OM2)
500 m (1,640 ft) (OM3)
62.5 150 m (492 ft)
9 NA
50 150 m (492 ft) (OM2)
380 m (1,246 ft) (OM3)
62.5 70 m (230 ft)
9 NA
50 50 m (164 ft) (OM2)
150 m (492 ft) (OM3)
62.5 21 m (69 ft)
9 NA

Memory Specifications

on page 28.
Memory specifications
Long Wavelength (LWL)
NA
NA
10 km (6.2 miles)
NA
NA
NA
NA
NA
NA
NA
NA
10 km (6.2 miles)
Table 10.
Installed Memory
512 MB
1 GB
A
Extended Long
Wavelength (ELWL)
NA
NA
40 km (24.8 miles)
NA
NA
40 km (24.8 miles)
NA
NA
NA
NA
NA
NA
27