Data Transmission Ranges - Brocade Communications Systems 300 Reference Manual

A

Data transmission ranges

TABLE 7
ANSI Fibre Channel protocol
Modes of operation
Fabric initialization
FC-IP (Fibre Channel over IP)
Aggregate switch I/O bandwidth
Port-to-port latency
Table 8
TABLE 8
Country
United States
Canada
Japan
European Community
Australia/New Zealand
Argentina
Russian Federation
Korea
China (PS only)
Taiwan (PS only)

Data transmission ranges

Table 9
26
General Specifications (Continued)
lists the EMC (electromagnetic compatibility) for the Brocade 300.
EMC specifications
provides the data transmission ranges for different cable types and port speeds.
FC-PH (Fibre Channel Physical and Signaling Interface standard)
Fibre Channel Class 2, Class 3, Class F
Complies with FC-SW-2 6.6
Complies with FC-IP 2.3 of FCA profile
384 Gbps if all 24 ports running at 8 Gbps, full duplex
Less than 700 nanoseconds with no contention (destination port is free)
Safety
Bi_Nat UL/CSA 60950-1 1st Ed or
latest
Bi_Nat UL/CSA 60950-1 1st Ed or
latest
EN60950-1 or latest
IEC60950-1 or latest
IEC60950-1 or latest
GB4943-2001 and
GB9254-1998 or latest
CNS 14336(94) or latest
EMC
ANSI C63.4
ICES-003 Class A
CISPR22 and JEIDA (Harmonics)
EN55022 and EN55024
EN55022 or CISPR22 or AS/NZS
CISPR22
51318.22-99 and 51318.24.99
KN22 and KN24
GB17625.1-2003 or latest
CNS 13438(95) or latest
Brocade 300 Hardware Reference Manual
53-1000862-02