Weight And Physical Dimensions; Facility Requirements; Power Supply Specifications - Brocade Communications Systems 300 Reference Manual

A

Weight and physical dimensions

Weight and physical dimensions

Table 3
TABLE 3
Height
Depth
Width
Weight

Facility requirements

Table 4
TABLE 4
Type
Electrical
Thermal
Cabinet (when
rack-mounted)

Power supply specifications

The power supply is universal and capable of functioning worldwide without using voltage jumpers
or switches. It meets IEC 61000-4-5 surge voltage requirements and is autoranging in terms of
accommodating input voltages and line frequencies. The power supply has its own built-in fan for
cooling, pushing the air toward the port side of the switch. The power supply is not removable.
Table 5
TABLE 5
Specification
Inlet
Maximum output from the power supply
System power consumption
24
lists the weight and physical dimensions of the Brocade 300 switch.
Switch Specifications
Brocade 300
42.9 mm (1.69 inches)
306.6 mm (12.07 inches)
428.75 mm (16.88 inches)
4.2 kg (9.3 lbs)
provides the facilities requirements that must be met for the Brocade 300.

Facility Requirements

Requirements
•
Primary AC input 100-240 VAC, 2.0A, 47-63 Hz; switch autosenses input voltage
•
Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating
on the switch nameplate
•
Circuit protected by a circuit breaker and grounded in accordance with local electrical
codes
Refer to Table 5 on page 24
•
A minimum air flow of 39.1 cubic meters/hour (23 cubic ft/min.) available in the
immediate vicinity of the switch
•
Ambient air temperature not exceeding 40
•
One rack unit (1U) in a 48.3 cm (19-inches) cabinet
•
All equipment in cabinet grounded through a reliable branch circuit connection
•
Additional weight of switch not to exceed the cabinet's weight limits
•
Cabinet secured to ensure stability in case of unexpected movement
lists the power supply specifications for the Brocade 300.
Brocade 300 Power Supply Specifications
for complete power supply specifications.
° °
C (104 F) while the switch is operating
Value
C13
75 watts
48 watts nominal, 57 watts maximum
Brocade 300 Hardware Reference Manual
53-1000862-02