Brocade 300 Installation and Configuration
In this chapter
Items included with the Brocade 300
The following items are included with the standard shipment of the Brocade 300. When you open
the Brocade 300 packaging, verify that these items are included in the package and that no
damage has occurred during shipping:
•
•
Installation and safety considerations
You can install the Brocade 300 switch in the following ways:
Electrical considerations
To install and operate the switch successfully, ensure the following:
Brocade 300 Hardware Reference Manual
53-1000862-02
•
Items included with the Brocade 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
•
Installation and safety considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
•
Installing a standalone Brocade 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
•
EIA cabinet installation for a Brocade 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
•
Brocade 300 configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
One Brocade 300 Fibre Channel switch
An accessory kit containing:
-
Serial cable with an RJ-45 connector
-
6 ft. Power Cord
-
Rubber feet, required for setting up the switch as a standalone unit
-
Brocade Family Documentation CD
-
Brocade 300 QuickStart Guide
-
EZSwitch Setup CD
-
Access Gateway Quick Start Guide
1. As a standalone unit on a flat surface.
2. In an EIA cabinet using a fixed-rail rack mount kit. The optional fixed-rail rack mount kit can
be ordered from your switch retailer.
3. In an EIA cabinet using an optional slide-rail rack mount kit. The optional slide-rail rack
mount kit can be ordered from your switch retailer.
Chapter
2
5