Serial Port Specifications; Supported Sfps And Hbas; Regulatory Compliance; Fcc Warning (Usa Only) - Brocade Communications Systems 300 Reference Manual

A

Serial port specifications

Serial port specifications

The serial port is located on the port side of the switch as a RJ-45 connector, designed to connect
to a DTE port.
Use the serial port to connect to a computer workstation to configure the switch IP address without
connecting to the fabric. The serial port's parameters are 9600 baud, 8 data bits, no parity, 1 stop
bit, and no flow control.

Supported SFPs and HBAs

When you receive the Brocade 300, your package contains at least 8 Brocade-branded SFPs for
the base configuration. Use only SFPs that are tested and supported.
For the most up to date list of supported SFPs and HBAs for the Brocade 300, check Brocade
Connect. Using a web browser, connect to www.brocade.com and click the Brocade Connect link.

Regulatory compliance

This section describes the regulatory compliance requirements for the Brocade 300. It contains:
•
•
•
•
•
•
•
•
•

FCC warning (USA only)

This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user's own
expense.
28
"FCC warning (USA only),"
"MIC statement (Republic of Korea)"
"VCCI statement Japan" on page 29
"CE statement" on page 29
"Canadian requirements"
"Laser compliance" on page 30
"RTC battery" on page 30
"Electrical safety" on page 30
"Regulatory certifications"
next
on page 29
on page 30
on page 31
Brocade 300 Hardware Reference Manual
53-1000862-02