Synchronous X/Y Control Mode - Mitsubishi Electric NZ2GN2S1-16D User Manual

Synchronous X/Y control mode

Controls I/O by turning on and off the remote input signal and the remote output signal.
An I/O module operating in the synchronous X/Y control mode acquires an input signal at each synchronization cycle, and
changes the output signal.
When the synchronous X/Y control mode is used, the input signal acquisition timing and the output signal change timing can
be made to match between I/O modules.
The synchronous X/Y control mode has the following two types.
• Synchronous X input control ( Page 156 Synchronous X input control)
• Synchronous Y output control ( Page 156 Synchronous Y output control)
(1)
(2)
(3)
(4)
(5)
(6)
(1) Master module
(2) Station No.1 input module
(3) Station No.2 input module
(4) Station No.3 output module
(5) Station No.4 output module
(6) Station No.5 output module
(7) Input loading timing synchronization
(8) Synchronization cycle
(9) Output change timing synchronization
ON
Input of station No.1 OFF
Input of station No.2 OFF
Output of station No.3 OFF
OFF
Output of station No.4
Output of station No.5 OFF
8.3 CC-Link IE Field Network Synchronous Communication Function
(7)
ON
(8)
ON
ON
ON
(9)
8 FUNCTIONS
8
155