Details Of Remote Input Signals; Details Of Remote Output Signals - Mitsubishi Electric NZ2GN2S1-16D User Manual

Details of remote input signals

The following describes the details of the remote input signals for the master/local module.
External input signal
■Device number
Name
External input signal X0 to external input signal X1F
■Description
This signal shows the on/off status of the external input of input module and I/O combined module.
When a major or moderate error occurs in the I/O module, the external input signal turns off.

Details of remote output signals

The following describes the details of the remote output signals for the master/local module.
External output signal
■Device number
Name
External output signal Y0 to external output signal Y1F
■Description
This signal turns on/off the external output of output module and I/O combined module.
When a major or moderate error occurs in the I/O module, external output turns off, regardless of the status of
the external output signal.
In addition, when either of the following conditions is applied, due to the output HOLD/CLEAR setting function,
external output may operate differently than the status of the external output signal.
• The I/O module is disconnected from the data link.
• The operation status of the CPU module is STOP or it is suspended by an error.
For details on the output HOLD/CLEAR setting function, refer to the following.
Page 153 Output HOLD/CLEAR Setting Function
Device number
RX0 to RX1F
Device number
RY0 to RY1F
Appendix 1 Remote I/O Signal
A
APPX
219