Functions Used When Making Calls; Making Calls; Considerations; Using The Handset - Siemens HiPath 1100 User Manual

Step by step
Functions used when making
calls

Making Calls

Considerations

• When authorized, it allows you to call external num-
bers
• The HiPath 1100 can also be programmed to require
pressing the "Internal" key before an internal number
can be dialed. When this is the case, there is no
need to enter an external line access code to dial an
external number ("Automatic Seizure of an exter-
nal line
nician.
• Ask your support technician for the required internal
numbers, public network access codes as well as
information about activated features and available
extensions.
• Depending on how the HiPath 1100 is programmed
(ask the system's technical support team) it will au-
tomatically select the most economical route for
making an external call (LCR - Least Cost Routing).
When an LCR is not available, a warning tone is
emitted

...Using the Handset

n
Lift the handset.
p
• For an internal call: Enter an extension number
(e.g., 11/101).
• For an external call: Enter the access code to ac-
cess an external line (e.g., 0) and the external num-
ber you want to call.
w s
Wait for the call to be answered. Start conversation.
[1] See Important programming data - classes of service in the Pro-
gramming manual.
[2] It allows the user to dial an external call directly, without having to
dial an external access code (e.g 0). If a continuous dialing tone is
heard when the handset is lifted, it means that Automatic Seizure
Mode is activated (see Programming na External Line - Automatic
Seizure of an external line, in the programming manual).

Functions used when making calls

1
on a public network.
2
"). Check with your system's support tech-
13