Programming Individual Speed Dialing - Siemens HiPath 1100 User Manual

Step by step

Programming Individual speed dialing

The speed dialing numbers stored in the Individual
speed dialing directory are only available for the exten-
sion in which they were entered. These numbers can
be updated, modified and deleted. Each extension can
have up to 5 speed dialing numbers of 20 digits each.
qmf
Enter the code to program a speed-dial number. (*92)
p
Enter the Individual speed dialing abbreviated number:
qd
•
p
Enter the external number to be stored in this position
in the Individual speed dialing directory.
w
Wait 5s Wait 5 seconds until you hear a confirmation tone.
Optional An Interdigit Pause ("P") can be added by pressing the
redial key.
Functions used when making calls
qh
to = Individual speed dialing
Each "P" character inserts a 2-second pause (de-
fault) in the connection. A longer pause can be in-
serted by entering more than one character (for
example, for a 4-second pause enter "PP")
The first "P# or #" specifies that the next digits for
A will only be forwarded if:
• Digital line or S
0
P# - DTMF digits are sent after local carrier
identification, when B is not answered.
# - DTMF digits are sent after B is an-
swered.
• Analog trunk or analog extension:
P# or # - DTMF digits are sent after B is an-
swered.
Other characters ("#" and/or "*") may be add-
ed after "P#".
extension:
19