Lcr Bypass - Siemens HiPath 1100 User Manual

Step by step

LCR BYPASS

w
Wait for an external line dial tone.
p
Enter the external number you want to call.
w s
Wait for the call to be answered. Start conversation.
You can program the HiPath 1100 to send a warning
tone if no external line is available for LCR (see Program-
ming manual - Main Configurations - Warning Tone
when LCR is not available). This will alert the user to the
fact that the call is being completed by a standard carri-
er and that rates may be higher than usual.
On analog telephones, a warning tone indicates to the
user that a different carrier is being used.
LCR Bypass
This makes it possible temporarily to deactivate the
rules of the LCR for an external call, using the carrier se-
lected by the user to make the connection.
Required: The LCR feature is available.
Press the "LCR Bypass" key.
or
qhi
Enter the code for "LCR BYPASS".
p
Enter the desired carrier code and number.
s
Start conversation.
End LCR Bypass
t
Replace the handset.
[1] The rules of the LCR will only be ignored for the current call. If a
consultation or redialing is made, the rules of the LCR will be ana-
lyzed for this new call.
This feature may be activated by any extension.
Functions used when making calls
1
29