Using The Hipath 1100 Features; Considerations; Numbering Plan - Siemens HiPath 1100 User Manual

Using the HiPath 1100 Features

Considerations

The system telephone model used for describing all of the HiPath 1100 features is the 500
Standard optiPoint.
For each usage procedure, please check the model of the system telephone in use. To ad-
just device settings, consult the instruction manual.
For information on basic functions, refer to the Quick Reference Guide for system tele-
phones.
The information in this document provides only general descriptions of the features. The
actual features may not correspond exactly to the descriptions herein and, furthermore,
they are subject to changes to the extent that products continue to be developed.
The selection of features to be provided is not binding unless explicitly established in the
terms of the contract.

Numbering plan

A Numbering plan assigns extensions, external lines, and groups - as well as other num-
bers that can be selected with features and programming codes - to execute specific func-
tions.
Description
External line
Extension, including S
Groups of external lines
Call groups (CG)
Hunt groups (HG)
UCD subscriber groups
Carrier
EVM - Default internal number
EVM - Message ports
EVM - Virtual Ports
Fax/DID - Virtual message ports
USB/CAPI line
Substitution for * and #
HiPath 1120
801 to 808
0
Using the HiPath 1100 Features
HiPath 1150
801 to 832
11 to 30 11 to 60
610 to 645
0 or 890 to 899
770 to 779
780 to 789
790 to 799
7491 and 7492
744 to 747
740 to 743
10
75 and 76 (accordingly)
HiPath 1190
801 to 845
101 to 240
9
790
100
11