Makita PM7651H Technical Information page 9

6-2 Cock section
6-2-1 Disassembling
Fig. 6-2-1-1
[1] Release two Hose clamps 76, and remove Cock body
and Strainer case.
Strainer case
Front side
Hose clamp 76 (2 pcs.)
[2] The components of Cock section are as follows:
Tube 10-500
Cap hose
Hose clamp 14
Fig. 6-2-1-3
[3] Remove 4x18 Tapping screw, and remove Cock lever.
4x18 Tapping screw
Cock
Cock body
Fig. 6-2-1-2
Joint strainer
Strainer case
3x16 Tapping screw
(2 pcs.)
Cock lever
9 / 41
Hose clamp 14
Hose clamp 14
O-ring 12 Cock
body
[4] Screw 4x18 Tapping screw into Cock, and remove Cock
by holding it with long-nose pliers.
[5] Remove O-ring 9.
4x18 Tapping screw
Tube 10-750
Pliers
Fig. 6-2-1-4
Cock
O-ring 9