Makita PM7651H Technical Information page 30

[4] Mount Air cleaner element onto Air cleaner plate.
[5] Mount Air cleaner cover complete onto Air cleaner plate, then secure with M5x25 Pan head screw.
Note: For secure mounting, be sure to fit the locking tab of Air cleaner plate into the slot of Air cleaner cover complete.
6-11-6 Adjusting Carburetor
Note: Use 1R070 to measure the engine rpm.
[1] Start the engine, wait for about 3 minutes in warming operation, and then adjust the engine rpm to 2,800 min
turning the idle adjusting screw.
[2] Assemble the machine completely, with Nozzle attached, and open the throttle fully, and then check if the engine rpm is over
-1
7,400 min .
Fig. 6-11-5-4
Locking tab
Air cleaner plate
Fig. 6-11-6-1
Idle adjusting
screw
30 / 41
Air cleaner element
Slot
Air cleaner cover
complete
M5x25 Pan head screw
-1
at idling by