Makita PM7651H Technical Information page 29

Petrol mist blower

Hide thumbs Also See for PM7651H:

6-11-3

Assembling Carburetor

Assemble by reversing the disassembly procedure.

Note: Make sure that the assembling direction of each part is correct.

6-11-4

Vacuum leak test of Carburetor

Connect 1R127 with the fuel inlet of Carburetor, then increase the testing pressure up to 0.05Mpa.

The pressure will stay the same about 10 seconds if there is no vacuum leak.

Carburetor

6-11-5

Mounting Carburetor

[1] With two M5x70 Pan head screws, fasten the following five parts to Cylinder head complete:

Carburetor gasket (large), Carburetor, Plate 31, Carburetor gasket (small), Air cleaner plate

Fig. 6-11-5-2

[2] Connect two Tubes to Carburetor.

Tube (blue)

Primer pump

Fig. 6-11-4-1

1R127

Fig. 6-11-5-1

Carburetor gasket (large)

Carburetor

Plate 31

Carburetor gasket (small)

M5x70 Pan head screw (2 pcs.)

[3] Connect Return tube (to Cylinder) and Breather pipe to

Carburetor

Tube (black)

29 / 41

Air cleaner

plate

Fig. 6-11-5-3

Air cleaner plate.

Breather pipe

Return tube

(to Cylinder)

Air cleaner plate