Makita PM7651H Technical Information page 13

Petrol mist blower

Hide thumbs Also See for PM7651H:

[3] Remove the fuel tubes of Tube assembly from Carburetor and Primer pump. (Fig. 6-4-1-4)

[4] Remove three M6x12 Pan head screws, and remove Fuel Tank. (Fig. 6-4-1-5)

Fig. 6-4-1-6

Fig. 6-4-1-4

Primer pump

Transparent blue

fuel tube of Tube

assembly

6-4-2

Assembling

Assemble by reversing the disassembly procedure.

Note:

When connecting the fuel tubes of Tube assembly to Carburetor and Primer pimp, do not confuse them. Be sure to connect the

black one to Carburetor and the transparent blue one to Primer pump. (Fig. 6-4-1-4)

When mounting Engine cover, be careful not to bend nor pinch the breather pipe. (Fig. 6-4-1-6)

Do not forget to pass the fuel tubes of Tube assembly through the slit of Engine cover. (Fig. 6-4-2-1)

Black fuel tube of

Tube assembly

Engine cover, viewed

from the rear

Slit of Engine cover

Fig. 6-4-1-3

Breather

pipe

Carburetor

Tube assembly

Fig. 6-4-1-5

Fig. 6-4-2-1

13 / 41

Fuel tank

M6x12 Pan head screw (3 pcs.)