Makita PM7651H Technical Information page 36

Fig. 6-14-1-2-5
[8] Assemble Oil case gasket, Lead valve and Retainer plate with
M4x10 Socket head bolt.
Note: Do not reuse removed Oil case gasket. Replace it with a
new one.
Oil case gasket
Retainer plate
Fig. 6-14-1-2-7
[10] Assemble Oil case to Cylinder block set with five M5x25
Hex socket head bolts in the following order.
(4)
(2)
Oil case
M4x10 Socket
head bolt
Lead valve
Note: Face the chamfered corner
toward the oil filter opening.
(1), (6)
(5)
(3)
M5x25 Hex
socket head
bolt (5 pcs.)
[9] Bend Oil tube to the lead valve side.
36 / 41
Fig. 6-14-1-2-6
Oil tube