Makita PM7651H Technical Information page 16

[7] Remove Hose clamp 14, and remove Sponge 12 by disconnecting Tube 10-300 from Joint 1. (Fig. 6-6-1-5)
[8] Remove Strap by removing Joint 1 and Grommet from the top of Tank complete. (Fig. 6-6-1-5 and Fig. 6-6-1-6)
[9] Remove Hose clamp 14, and remove Tube 10-500 from Joint 1 and Mixing body upper. (Fig. 6-6-1-6 and Fig. 6-6-1-7)
[10] Remove two M5x12 Pan head screws, and remove Mixing body upper from Mixing body lower. (Fig. 6-6-1-7)
[11] Remove Check valve and Flat washer 10 from Mixing body lower. (Fig. 6-6-1-7)
Note: Be sure not to lose Flat washer 10.
Fig. 6-6-1-5
Joint 1
Grommet
Tube 10-500
M5x12 Pan
head screw
(2 pcs.)
6-6-2 Assembling
Assemble by reversing the disassembly procedure.
Sponge 12
Tube 10-300
Hose clamp 14
Tank complete
Fig. 6-6-1-7
Hose clamp 14
Mixing body
upper
Check valve
Flat washer 10
Mixing
body lower
Fig. 6-6-1-6
Tube 10-500
Joint 1
16 / 41
Tank cap assembly
Strap is hooked to
Strap
Joint 1.
Hose clamp 14
Fig. 6-6-1-8
Grommet
Hose clamp 14
Tube 10-420