Makita PM7651H Technical Information page 10

6-2-2 Assembling
[1] Assemble by reversing the disassembly procedure.
Fig. 6-2-2-1
[2] Apply Makita grease FA No.2 a little on the
outer circumference of Cock and O-ring 9.
Fig. 6-2-2-3
[4] Assemble Cock section to Straight pipe.
Cock section
Straight pipe
[3] Insert Cock into Cock body and turn it with pliers as shown below,
(1)
O-ring 9
Cock
(3)
10 / 41
Fig. 6-2-2-2
and assemble Cock lever with 4x18 Tapping screw.
(2)
Cock lever
4x18 Tapping screw